J5create USB VGA Display Adapter User Manual

20
5. When Install Shield Wizard is complete, Click Finish
6. Connect the external display device (monitor/ projector) to the VGA
connector of USB Display Adapters and turn it on.
7. Connect the USB Display Adapter into an available USB 2.0 port of a PC
or Notebook, After Inserting the USB Display Adapter into an USB 2.0 port,
the “Installing device driver software” message will pop up.

J5create USB VGA Display Adapter Specifications

General

Brand	J5create
Model	USB VGA Display Adapter
Category	Adapter
Language	English