jablotron TD-110W User Manual

Note: Although this product does not contain any harmful materials
we suggest you to return the product to the dealer or directly to the
producer after usage.
The TD-110 is an automatic dialing device that transmits a prerecorded voice message to 4 telephone
numbers to an ordinary or mobile telephone system. It can also send a numeric message to your Pager.
The communicator can be triggered manually or by another device connected to the TD-110 input. The
optional model TD-110W can also be triggered with a wireless remote control.
The communicator can automatically call for help or to report different events. Its installation and pro-
gramming is extremely easy relative to traditional dialers.
Telephone communicator TD-110 / TD-110W - 4 - MEN51207 Telephone communicator r TD-110 / TD-110W - 1 - MEN51207

jablotron TD-110W Specifications

General

Brand	jablotron
Model	TD-110W
Category	Cell Phone
Language	English

Summary

Telephone Dialer TD-110 / TD-110W Overview

Device Functionality Diagram

Illustrates key functions like storing numbers, recording messages, and keypad operations.

Device Components and Indicators

Details the microphone, speaker, status LEDs (calling, locked keypad, stand-by), and terminal cover.

Installation and Initial Setup

Physical Installation

Instructions for mounting the communicator using screws and connecting to telephone lines and power.

Terminal Connections

Description of the IN, OUT, GND +12V, IN1, and TAMPER terminals and their functions.

Initial Power-On and Self-Test

Procedure after switching power ON, including self-testing and entering standby mode.

Device Configuration and Operation

Storing Telephone Numbers

Procedure for entering and storing up to four telephone numbers with a maximum of 16 digits each.

Message Recording and Pager Messaging

How to record a voice message (max 20 sec) and send a numeric message to a pager (max 26 digits).

Dialing Method Selection

Setting the dialing method to Pulse or Tone (factory default is Tone).

Testing and Message Listening

Performing a test call to all programmed numbers and listening to the recorded voice message.

Keypad Locking and Unlocking

Securing the keypad with a custom PIN and unlocking it to allow further operation.

Remote Control Management (TD-110W)

Learning and erasing remote controls for the TD-110W model.

Troubleshooting and Specifications

Communicator Operation Logic

Explains how the TD-110 activates via input trigger, Fce key, or remote control to call programmed numbers.

Basic Troubleshooting Steps

Checks for correct dialing method, telephone line signal, and re-entering numbers or messages.

Forgot Access Code Recovery

Procedure to unlock the keypad if the custom PIN is forgotten by disconnecting power.

Technical Specifications

Details operating voltage, consumption, triggering methods, telephone line interface, and compliance.