To Next Page

To Previous Page

5. Charge your headset

Make sure that your headset is fully charged for 2 hours before you start

using it. Use the AC power supply to charge from a power socket. When the

light indicator (LED) has a solid LED light, your headset is charging. When

the solid LED light turns o, it is fully charged. (See g 2)

Use only the charger provided in the box - do not user chargers from any

other devices as this may damage your headset.

Please note: The lifetime of the battery will be signicantly reduced

if your device is left uncharged for a long period. We therefore

recommend that you recharge your device at least once a month.

6. Turning your headset on and o

• Press the answer/end button until you see a burst of ashes on the

indicator light (LED) to turn on your headset.

• Press and hold the answer/end button until you see a burst of ashes

on the indicator light (LED) to turn the headset o.

Please note that the LED indicator light turns o after 1 minute to save

battery. Headset is still active, and light will ash again after tap on the

Answer/End button or any call activity. To check if the headset is on,

tap the answer/end button once – the LED indicator light will ash, if the

headset is on.

g 2

1 2

Jabra BT2015 User Manual

Other manuals for Jabra BT2015