EasyManuals Logo

Jabra BT2015 User Manual

Jabra BT2015
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5
7. Pairing it with your phone
Headsets are connected to phones using a procedure called pairing’. By
following a few simple steps, a phone can be paired with a headset in a
matter of minutes. ( See g 3)
1. Put the headset in pairing mode
When you turn on your Jabra BT2015 for the rst time, the headset will
automatically start up on pairing mode – i.e. it is discoverable for your
phone. When the headset is in pairing mode the LED is constantly lit.
2. Set your Bluetooth phone to discover’ the Jabra BT2015
Follow your phones instruction guide. First make sure that Bluetooth is
activated on your mobile phone. Then set your phone to discover the
headset. This usually involves going to a setup, connect’ or ‘Bluetooth
menu on your phone and selecting the option to discover or ‘add’ a
Bluetooth device.*
3. Your phone will nd the Jabra BT2015
Your phone will nd the headset under name “Bluetooth headset.
Your phone then asks if you want to pair with the headset. Accept by
pressing Yes’ or ‘OK’ on the phone and conrm with the passkey or PIN
= 0000 (4 zeros). Your phone will conrm when pairing is complete.
In case of unsuccessful pairing, put the Jabra BT2015 into pairing mode
manually. Make sure the headset is o. Press and hold the answer/end
button for approximately 5 seconds until the LED has a constant light.The
LED will ash before the light is constant – keep holding down the button
until light is constant.
1 2
g 3

Other manuals for Jabra BT2015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jabra BT2015 and is the answer not in the manual?

Jabra BT2015 Specifications

General IconGeneral
BrandJabra
ModelBT2015
CategoryHeadsets
LanguageEnglish

Related product manuals