5
english
JABRA CLIPPER
1.b. Later pairing
- Press and hold the Multi-Function button until the indicator
light is solid blue (approximately 6 seconds).
2. Set your Bluetooth® phone or device to search for the Jabra
CLIPPER
- Follow your phone’s instruction guide. First make sure that
Bluetooth® is activated on your mobile phone. Then set your
phone to search for the headset. This usually involves going
to a ‘setup,’ ‘ connect’ or ‘Bluetooth®’ menu on your phone and
selecting the option to search for or ‘add’ a Bluetooth® device.*
3. Your phone will find the Jabra CLIPPER
- The phone will find the headset under name “Jabra CLIPPER”.
- Your phone then asks if you want to pair with the headset.
- Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
Note: All communications between your Jabra CLIPPER headset
and mobile phone are encrypted, so others will not be able to
intercept and understand your conversation. Establishing this
encryption is an important part of the pairing process.
WeARInG stYLe
Jabra CLIPPER is designed as a clothing clip. This gives you a
variety of simple and practical wearing styles: Just clip it on your
shirt, jacket, t-shirt or whatever fits your needs.
Regardless of how you clip-on the Jabra CLIPPER, always be sure
to place the headset so that the microphone is positioned as close
to your mouth as possible. This will ensure that your voice comes
through loud and clear.
* Phone dependent
To Next Page
Loading...
Need help?
Battery
Connectivity
