Jabra Engage 75 Convertible User Manual

Jabra Engage 75 Convertible
How do I connect my Jabra wireless headset with the Jabra
Link 14201-41 to my Cisco 8941 or 8945 desk phone so I have
remote call control using my headset?
Connection:
1. Connect the AC adapter that is supplied with the headset to the
headset base. Connect the other end to an electrical outlet.
2. Connect the Jabra Link 14201-41 EHS cable with the red band to the
AUX interface on the headset base. Connect the end with the blue band
to the headset base socket that is marked with a phone icon.
3. Connect the single end of the Jabra Link 14201-41 EHS cable to the
headset interface on the Cisco 8941 or 8945 desk phone.
Configuration:
1. Ensure the EHS headset function on the desk phone is enabled. To
enable, press the Applications button on the desk phone. Use the
navigation pad and select buttons to scroll and select your preferences.
For Selected E-Hookswitch connected, select Yes.
2. Follow the setup instructions for your Jabra wireless headset. If the
headset base requires manual configuration, set the electronic hook
switch setting to “IQ” and set the dial tone switch to position “A”.
3. Make a call to the headset. If the volume of your voice is too loud or
29/06/2021 17:05
https://www.jabra.co.nz/supportpages/jabra-engage-75/9555-583-117/faq/289a9bcb-
6630-47cf-a80b-b718c1136063
Page 1 of 2

Jabra Engage 75 Convertible Specifications

General

Foldable	Yes
Headset type	Monaural
Product type	Headset
Certification	CE, CB, FCC, IC, NOM, NTC, EAC, PSB, ICASA, TELEC, SIRIM, ACMA, NZ Telepermit, UL
Product color	Black
Wearing style	Neck-band, Ear-hook, Head-band
Operating keys	Volume +, Volume -
Volume control	Button
Country of origin	China
Recommended usage	Office/Call center
Operating temperature (T-T)	-10 - 55 °C
Wireless range	100 m
Bluetooth version	5.0
Bluetooth profiles	PBAP
Connectivity technology	Wireless
Type	DECT telephone handset
Voice guidance languages	ENG, FRE, DEU, JPN, ESP
Ear coupling	Supraaural
Headphone frequency	40 - 16000 Hz
Cables included	USB
Eartips material	Silicone
Microphone type	Boom
Microphone frequency	100 - 10000 Hz
Number of microphones	1
Microphone direction type	Unidirectional
Standby time	32 h
Battery voltage	7.5 V
Battery capacity	650 mAh
Battery recharge time	1.3 h
Continuous audio playback time	9 h
Master (outer) case width	300 mm
Master (outer) case height	206 mm
Master (outer) case length	395 mm
Master (outer) case weight	4990 g
Harmonized System (HS) code	85183000
Quantity per master (outer) case	8 pc(s)
Package depth	145 mm
Package width	190 mm
Package height	95 mm
Package weight	560 g

Weight and Dimensions

Depth	32 mm
Width	105 mm
Height	50 mm
Weight	18 g

Summary

Connection Steps for Jabra Engage 75

Connect Headset Base to Power

Connect the supplied AC adapter to the headset base and an electrical outlet.

Connect EHS Cable to Base

Connect the red band end of the EHS cable to the AUX interface and the blue band end to the phone icon socket.

Connect EHS Cable to Desk Phone

Connect the single end of the EHS cable to the headset interface on the Cisco desk phone.

Configuration for Remote Call Control

Enable EHS Headset Function

Ensure EHS function is enabled on the desk phone via the Applications button and select 'Yes' for E-Hookswitch.

Manual Headset Configuration

Set the electronic hook switch to 'IQ' and dial tone switch to 'A' if manual configuration is needed.

Adjust Microphone Volume

Make a call to the headset and adjust microphone volume for optimal sound levels.