Jabra Engage 75Mono User Manual

How do I connect my Jabra wireless headset with the Jabra
Link 14201-35 to my Avaya desk phone so I have remote call
control using my headset?
Jabra Engage 75 Mono
Connection:
1. Disconnect the network cable of the phone.
2. Connect the AC adapter that is supplied with the headset to the
headset base. Connect the other end to an electrical outlet.
3. Connect the modular plug cable that is supplied with the headset to the
Jabra Link 14201-35 EHS adapter in the socket marked with a phone
icon. Connect the cable end with the blue band to the headset base
socket that is marked with a phone icon.
4. Connect the Jabra Link 14201-35 EHS adapter cable end with the white
band to the Jabra Link 14201-35 EHS adapter port marked with a white
handset/headset icon. Connect the other end to the headset interface
on the Avaya phone.
5. Connect the Jabra Link 14201-35 EHS 2.5 mm ring sensor to the Jabra
Link 14201-35 EHS adapter in the bell socket. Position the circular ring
sensor over the speaker of the desk phone.
6. Connect the Jabra Link 14201-35 EHS cable with the red band to the
AUX interface on the headset base. Connect the other end to the AUX
interface on the Jabra Link 14201-35 EHS.
07/04/2021 16:00
/supportpages/jabra-engage-75/9556-583-117/faq/3dd31ea1-f6a5-4a3a-8b94-
8a252b4b6e80
Page 1 of 2

Jabra Engage 75Mono Specifications

General

Wireless Technology	DECT
Talk Time	Up to 13 hours
DECT security	Yes
Base Touch Screen	Yes
Busy Light	Yes
Noise Cancellation	Yes
Microphone Type	Boom microphone
Warranty	2 years
Connectivity	USB, 3.5mm jack
Microphone	Noise cancelling
Wireless Range	Up to 150m/490ft

Summary

Connecting Jabra Wireless Headset to Avaya Phone

Disconnect Phone Network Cable

Disconnect the network cable of the phone before starting the connection.

Connect Headset AC Adapter

Connect the AC adapter to the headset base and an electrical outlet.

Connect Modular Plug Cable to EHS Adapter

Connect modular plug cable from headset base to EHS adapter's phone icon socket.

Connect EHS Adapter Cable to Phone

Connect EHS adapter cable (white band) to phone and headset interface.

Position EHS Ring Sensor

Position the EHS adapter's 2.5mm ring sensor over the desk phone speaker.

Connect EHS Cable to AUX Interface

Connect the EHS cable (red band) to the headset base AUX interface.

Configuring Jabra Headset for Avaya Phone

Enable EHS Function on Desk Phone

Ensure the EHS headset function is enabled on the desk phone.

Set Headset Base Configuration Switches

Set EHS hook switch to "DHSG" and dial tone switch to "A".

Adjust Microphone Volume for Clarity

Adjust headset microphone volume during calls for optimal clarity.