8
english
JABRA CLIPPER
What the LED means:
The LED on the front side of Jabra CLIPPER indicates different
states of the product:
LED light
Solid Blue In pairing mode – see ‘Pair Jabra
CLIPPER to a phone or other device’
Slow single blue flash Connected to a phone and in standby
mode
Single blue flash Connected to phone and active on
call
Quick blue double
flash
Incoming call
Solid red Charging
Solid green Fully charged
Single red flash Low Battery
The Jabra CLIPPER Display LED turns off after 30 seconds of
inactivity. The headset is still active, and light will flash again after
a tap on the Multi-Function button or any call activity.
Communication by Audio Indicators
Your Jabra CLIPPER employs sound alerts to communicate
different actions or information. One important alert is the “Low
Battery” alert, which is two short beeps, and indicates 5 minutes of
battery time remains.
Another sound alert is the “Mobile Away” alert, which is four short
beeps, and indicates you are moving out of range of your mobile
phone.
To Next Page
Loading...
Need help?
Battery
Connectivity
