6
english
JABRA EASYCALL
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra EASYCALL
Jabra EASYCALL
OK
Passkey:
****
HANDSFREE
SELECT
Jabra EASYCALL
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the headset with a dierent phone, or if the
pairing process was interrupted, you can manually set the headset
to pairing mode.
Make sure the headset is on. Press and hold the answer/end button
for approximately 5 seconds until the Bluetooth® icon turns from
a steady light to a ashing light. Then repeat steps 2 and 3 in the
above pairing guide.
Connecting with your phone
Pairing is only needed the rst time a headset and phone are
used together. When the headset and phone have been paired
once, they will automatically connect when the headset is on and
Bluetooth® is activated on the phone. The headset can be used
when it is “connected” to the phone. If the devices are paired, but
do not immediately connect, tap the answer/end button. When
your headset is connected the Bluetooth® connection icon in the
STATUSDISPLAY™ WILL BE CONSTANT ON FOR 3 SECONDS and
the headset voice guidance will say “connected”.
WEARING STYLE
The Jabra EASYCALL is ready to be worn with or without the ear hook.
The ear hook can be removed and the headset can be used with
the Ultimate-t Eargels™.
The Ultimate-t Eargels™ can be used for both left and right wearing.
The Ultimate-t Eargels™ come in two dierent styles to t any ear.
You can also twist the eargel slightly to optimize the t and comfort.
For optimal performance, wear the Jabra EASYCALL and your
mobile phone on the same side of your body or within line of sight.
You will get better performance when there are no obstructions
between your headset and your mobile phone.
To Next Page
Loading...
Need help?
Battery
Connectivity
Weight and Dimensions
