Name: Jabra EASYGO
Brand: Jabra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

english

JABRA EASYGO

TURNING YOUR HEADSET ON AND OFF

- Slide the on/off button towards the symbol “I” to turn the

headset ON. When you do so both indicators will ash on the

Jabra StatusDisplay™.

- Slide the on/o button towards the symbol “O” to turn the

headset o.

PAIRING IT WITH YOUR PHONE

Headsets are connected to phones using a procedure called

‘pairing’. By following a few simple steps, a phone can be paired

with a headset in a matter of minutes.

1 Put the headset in pairing mode

- When you turn on your Jabra EASYGO for the rst time, the

headset will automatically start up in pairing mode – i.e. it is

discoverable for your phone. When the headset is in pairing

mode the Bluetooth® status indication on the StatusDisplay™ is

ashing.

2 Set your Bluetooth® phone to ‘discover’ the EASYGO

- Follow your phone’s instruction guide. First make sure that

Bluetooth® is activated on your mobile phone. Then set your

phone to discover new devices. This usually involves going

to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and

selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.*

3 Your phone will nd the Jabra EASYGO

- Your phone will nd the headset under name “Jabra EASYGO”.

Your phone then asks if you want to pair with the headset.

Accept by pressing ‘Yes’ or ‘OK’ on the phone. You may be

asked to confirm with a passkey or PIN. Then use 0000

(4 zeros). Your phone will conrm when pairing is complete

and the Bluetooth® status indication on the StatusDisplay™ will

shift from ashing light to steady light and the headset voice

guidance will say “connected”.

* Phone dependent

Other manuals for Jabra EASYGO

Questions and Answers:

Need help?

Do you have a question about the Jabra EASYGO and is the answer not in the manual?

General