Energy-saving Servo Motor
User Guide
Perface
GAUTION: PLEASE READ INSTEUCTION MANUAL CAREFULLY BEFORE OPERATEING. THE
INSTALLATION AND OPERATION MUST BE OPERATE UNDER PROFESSIONAL TRAINED STAFF.
This product only applies to the specified rang of sewing equipment, please do not to put other
uses.
SAFETY INSTRUCTION
1. Please read this manual carefully before installation and adjustion.
2. Installation and operation must be operated under professional trained staff.
3. It is not allowed change the structure and any motor parts, otherwise the customer should
take full responsibility.
4. Confirm the power connected to the ground safety and keep in accordance with the voltage
range and technical requirements in the nameplate.
5. Please leave your feet away from the speed governor when power is turned on or off.
6. You must cut the power off under below mentioned operation:
2) Insert or pull out any plug in the control box;
3) Threading, changing needle and rotate the machine head;
4) Machine maintenance and machine is in idle state;
7.The setting of control system and maintenance should be operated by trained staff.
8.There should be 20seconds separate during changes power.
9.The system must be connected to the ground safety.
I. Installation of speed governor
To Next Page
Loading...
Need help?
General
