Plasma 70 S
Operating Manual Page 5
4. Technical Data
Supply voltage 3-phase 400 V, 50 / 60 Hz
Max. power draw 19 kVA
Fuse 20 A slow
Set-point range infinitely variable 20 - 70 A
Max. open-circuit voltage 250 V
60 % duty cycle 70 A / 110 V
100 % duty cycle 50 A / 100 V
Max. cutting thickness, quality cut 20 mm
severance cut 25 mm
System of protection IP 22
Insulation class H (180° C)
Type of cooling F
Dimensions L x W x H (mm) 530 x 610 x 810
Weight 95kg
Compressed-air supply 5,5 bar
(depending on torch used) 160 l/min
Manufactured the European Standards:
EN 60974-1 and EN 50199
in accordance with
Authorized for cutting under increased electrical hazard in accordance with
the European Standard EN 60974-1.
S
To Next Page
Loading...
