15
open. The Drawer will auto lock when closed.
To change the code first enter the default code above pressing the Enter button twice. Enter the
new code and then press Enter. There are no limits to how many or how few numbers a code must
be, but it is recommended that you use 3 or 4 digits for the code.
Once the code is changed, the default code will no longer work so it is recommended that you
control the new code numbers in a central database so that forgotten codes can be found. If you
change the code and forget the new combination, the only way to open the drawer is to contact
JACO Custom Service and present the individual serial number on the lock assembly so that we can
send an override code. The serial number is located on the front edge of the lock as shown below.
HAVE A QUESTION? WE’RE HERE TO HELP.
C
ALL US AT 1-800-649-2278 OR VISIT JACOINC.COM/SUPPORT
JACO
INC. 140 CONSTITUTION BLVD, FRANKLIN MA, USA
LFP Integrated Battery System
The JACO Inte
rated Batter
Power S
stems are desi
ned s
ecificall
for the JACO Mobile