6
B.3.2 Network status
Telephone can obtain IP address from DHCP server in default mode. Enter WEB
interface to configure all related settings in accordance with real network
environment.
WAN IP Mode
Select WAN port IP address obtainment modes including
static/ DHCP/ PPPoE/ Bridge.
MAC Address Clone Enable MAC address clone or not
NAT Enable Activate NAT function or not.
VLAN Mode Activate VLAN mode or not
VLAN ID Set VLAN ID
DNS Mode
If DNS mode is Manual, user needs to set primary DNS and
secondary DNS manually. If DNS mode is Auto, IP phone will
obtain primary DNS and secondary DNS from DHCP server
automatically.
Primary DNS The Primary DNS setting
Secondary DNS The optional DNS setting
IP Address The network port IP address
Subnet Mask The network port subnet mask
Default Gateway The network port default gateway
Note:
1) When telephone IP address is switched from DHCP to static mode, all
parameters such as IP address, Subnet Mask, Default Gateway and DNS need to
be set manually.
2) Save and apply switched IP address settings and reboot the phone for new IP
address obtainment. Make sure the network is normal during daily using.
B.3.3 SIP Account Setting
Phone regular usage ,only need to configure Proxy Server, Display Name , Phone
Number, Account, Password.
Basic
Set basic information from VoIP service supplier, like phone
number, account, password, SIP proxy, and etc.
Audio Configuration Select audio format
Supplementary
Service Subscription
Auxiliary function
Call Waiting Enable call waiting or not
Hot Line Set hot line
MWI Enable Enable MWI or not
Voice Mailbox
Numbers
Voice Mailbox server
MWI Subscribe
Enable
Support MWI subscription
To Next Page
Loading...