Need help?Do you have a question about the Jacob Jensen IP20 and is the answer not in the manual?
General| Type | IP Phone |
|---|---|
| Ethernet Ports | 2 |
| PoE | Yes |
| Display Color | Monochrome |
| Wall Mountable | Yes |
| Display Size | 2.8 inch |
| Supported Protocols | SIP |
| Model | Jacob Jensen IP20 |
Lists functional keys and indicators on the handset.
Identifies parts of the base station and its rear.
Explains the purpose of various keys like Flash, Mute, and Redial.
Steps for mounting the telephone on a wall.
Instructions for using the table stand for base installation.
How to connect the network cable to the base station.
Method to obtain and broadcast the phone's IP address.
Steps to launch and log into the web interface.
Description of features and status displays in the web interface.
Detailed information on network settings like IP, DNS, and VLAN.
Configuration steps for essential SIP account parameters.
Customizing phone settings like volume and call waiting.
Managing passwords, languages, and factory defaults.
Instructions for updating the phone's firmware.
Setting up network parameters using the voice menu.
Configuring telephone port settings through the voice menu.
Performing a factory reset using the voice menu instructions.
Detailed WAN connection and IP settings in the voice menu.
Configuring DNS server addresses via the voice menu.
Various phone settings configuration through the voice menu.
Setting the phone number and server IP address in the voice menu.
Configuring physical port and call transfer options via voice menu.
Adjusting volume, redial timing, and ringing modes via voice menu.
Configuring speed dial buttons and voicemail through the voice menu.
Procedures for initiating, receiving, and ending calls.
Using Mute, Flash, and Redial during calls.
Adjusting volume and accessing voice messages.
How to reset the phone to its original factory settings.
To Next Page
