9
DNS After choosing key 5, the phone will broadcast current DNS;
after the broadcast is finished, DNS can be set up.
Submenu 2.1:
Telephone number After choosing key 1, the phone will broadcast current
phone number.
Server IP address After choosing key 2, the phone will broadcast current
server IP address.
Physical port After choosing key 3, the phone will broadcast current
physical port.
Call transfer configuration After choosing key 4, call transfer option can be set up.
Volume control mode After choosing key 5, volume control mode can be
selected.
Redial timing After choosing key 6, whether redialing number will
be removed after a fixed time can be set up.
Ringing voice adjusting
mode
After choosing key 7, whether ringing volume
adjustment is allowed can be set up.
Speed-dial button and
voice mail configuration
After choosing key 8, speed-dial button can be
configured.
Note:
1) When using voice menu configuration to achieve relevant operation, please
reboot the phone.
2) After entering password, IP address or other number, please enter # to confirm.
3) When using keyboard to enter password,
Press number key 2 if A, B, C, a, b, c is to be entered.
Press number key 3 if D, E, F, d, e, f is to be entered.
Press number key 4 if G, H, I, g, h, i is to be entered.
Press number key 5 if J, K, L, j, k, l is to be entered.
Press number key 6 if M, N, O, m, n, o is to be entered.
Press number key 7 if P, Q, R, S, p, q, r, s is to be entered.
Press number key 8 if T, U, V, t, u, v is to be entered.
Press number key 9 if W, X, Y, Z, w, x, y, z is to be entered.
When using the keyboard to enter the password, other characters can be
replaced by number key 0.
When entering IP address, use “*” to replace “.”; for example, if the IP address
is 192.168.10.100, enter 192*168*10*100 instead.
4) Press * key one time to return to the menu; press * key twice to return to the
menu if in IP address entering status.
5) Hanging off the phone can exit the voice menu.
To Next Page
Loading...