8
Local Upgrade
Click “Browse” to select certain firmware, click Upgrade
button for upgrading. After upgrade, phone will return to
initial interface.
Note:
After upgrade, phone needs factory default.
B.4 WEB Operation
Except regular configuration, please do not modify other corresponding
information.
C. VOICE MENU INSTRUCTION
The phone has voice menu function; relevant information can be configured
through voice menu. After starting the phone, press 4 times the key to enter
the voice menu. Hanging off can exit the voice menu.
Main Menu:
Network
Configuration
After choosing key 1, the phone will enter Submenu 1.1
network configuration setting.
Telephone port
configuration
After choosing key 2, the phone will enter Submenu 2.1 phone
port configuration setting.
Factory Reset After choosing key 3, enter the password; the phone will then
return to factory setting.
Speed Dial
configuration
After choosing key 4, enter speed-dial configuration option;
enter speed-dial key, then enter the speed-dial number to
complete the configuration.
Reboot After choosing key 5, enter password; the phone will then
reboot.
WAN Port Login After choosing key 6, enter password to set up whether WAN
port can allow logging.
WEB Access Port After choosing key 7, enter password to set up Web access
port.
Software Version After choosing key 8, current software version will be
broadcast.
Submenu 1.1:
Wan port
connection type
After choosing key 1, the phone will broadcast current Wan
port connection type; after entering password, DHCP or static
IP address can be set up.
Wan port IP
address
After choosing key 2, the phone will broadcast current IP
address; after the broadcast is finished, IP address can be set
up.
Wan port subnet
mask
After choosing key 3, the phone will broadcast current subnet
mask; after the broadcast is finished, subnet mask can be set
up.
Gateway After choosing key 4, the phone will broadcast current
gateway; after the broadcast is finished, gateway can be set up.
To Next Page
Loading...