Jacobsen AR331 - Page 228

QUICK START GUIDE
en-14
WARNING CLEAR RADIATOR SCREENS
When this screen is shown, the engine
temperature has risen above normal levels.
Park the machine in a safe area and
disengage the cutting units, set engine to
idle to allow engine temperature to
decrease prior to switching off the engine.
Turn engine off, clean the radiator and
screens of all grass and debris.
Press the select button to confirm the
fault.
WARNING BATTERY FAULT
When this screen is shown, the battery is
below 12V for 30 seconds.
Press the select button below to confirm
the fault.
WARNING CONTROLLER I/O FAULT
When this screen is shown, there is a
Controller I/O fault.
Press the select button below to confirm
the fault.
WARNING CAN TIMEOUT
This screen is shown if there is a
communications fault between the display
and the controller.
Stop the machine as soon as possible and
contact your service dealer. Check the
armrest and controller harness connections.
Press the select button below to confirm
the fault.
!
Engine Overheat
9
1
9
1
!
?? Solenoid Fault
(J?-??)
9
1
!
?? Solenoid Fault
(J?-??)
9
1
VISUAL DISPLAY