Jacuzzi 200 Series

Emphasizes reading all instructions before operating the spa for safety.

Warns against unsupervised use by children and stresses supervision.

Details grounding requirements for electrical safety.

Highlights the danger of accidental drowning and child supervision.

Warns about injury risk related to suction fittings and pump compatibility.

Advises on safe distances from metal surfaces to prevent electric shock.

Prohibits electrical appliances near the spa unless factory-installed.

Specifies requirements for the electrical supply and disconnect means.

Provides warnings related to water temperature and health.

Emphasizes reading all instructions for CSA compliance.

Details grounding terminal connection for shock prevention.

Explains bonding lug connection for shock prevention.

Requires bonding of external metal components to the grounding buss.

Instruction to save safety instructions.

Warning regarding child supervision for spa use.

Lists causes, symptoms, and effects of hyperthermia, including dangers for pregnant women.

Advises consultations for health conditions and reiterates temperature limits.

Covers time limits, alcohol/drug use, water testing, and appliance safety.

Emphasizes water chemistry and securing the cover for safety.

Explains the importance of proper grounding and bonding for electrical safety.

Stresses the importance of a stable and level base for the spa.

Provides recommendations for spa base construction and drainage.

Suggests considering proximity to changing areas and shelter for outdoor placement.

Advises keeping pathways clear of debris for easy spa access.

Warns about potential issues with trees and shrubbery near the spa.

Suggests sheltered locations to reduce operating costs.

Considers environmental enhancement and avoiding roof overhangs.

Advises on proper ventilation for indoor spa installations due to moisture.

Details power requirements for specific J-210/J-220 models.

Instructions for 240 VAC heater operation and wiring adjustments.

Covers wiring for 120V plug-in and 120/240V convertible models.

Instructions for dedicated 230-240V models, requiring hard-wiring.

Mandates a dedicated circuit and specifies wire sizing and type.

Details requirements for safety switches, circuit breakers, and GFCI protection.

Instructions on accessing the power terminal block and routing the power cable.

Instructions for connecting wires to terminal blocks, emphasizing secure connections.

Final steps for reassembling the control box and cabinet.

Provides step-by-step instructions for filling the spa with water.

Details filling procedure, air purging, and filter installation.

Includes a critical safety warning about checking water temperature before entering.

Control Panel Functions

Describes the functions of the LED display and indicator lights.

Explains the function of the Warmer and Cooler buttons.

Describes the functions of the Light and Jets buttons for pump control.

Describes the function of the Heat Indicator light.

Provides operational details including temperature adjustment and light/jets timing.

Identifies the control panel on the spa.

Identifies the air controls for adjusting jet intensity.

Identifies the filter and skimmer components.

Identifies the therapy jets for massage functions.

Identifies the diverter valve specific to the J-220 model.

Identifies the therapy seat area.

Identifies the spa light component.

Identifies vertical jets and suction fittings in the footwell.

Identifies the fittings for heater return and gravity drain.

Identifies calf jets specific to the J-220 model.

Explains how to operate the massage selector for J-210.

Explains how to operate the massage selector for J-220.

Identifies continuously powered jets group C.

Explains how to use air controls for jet groups.

Explains massage operation and identifies massage pumps for J-230 models.

Explains how to use air controls for jet groups on J-230.

Describes initial display information and diagnostic sequence upon power up.

Describes what happens after the start-up sequence, including heater activation.

Explains how massage selectors customize water diversion to jets.

Describes the automatic filtration cycles for debris removal.

Details standard filtration modes F1-F3 and their operation.

Details economy filtration modes F4-F6 and their operation.

Explains lock modes L1-L2 for service or preventing unauthorized use.

Provides instructions for setting the initial filtration/heating cycle time.

Emphasizes the importance of regular spa maintenance.

Details the process for cleaning the spa's filter cartridge.

Advises on periodic deep cleaning and the lifespan of filter cartridges.

Recommends draining and refilling the spa water every 3-6 months.

Critical warning to turn off power before draining to prevent component damage.

Cautionary notes regarding draining, especially in extreme temperatures.

Step-by-step instructions for draining the spa.

Advises on using non-abrasive cleaners for the spa interior.

Instructions for cleaning and maintaining the synthetic cabinet.

Caution against spraying the cabinet with a hose due to electrical risk.

Explains the spa's freeze protection and when to use specific modes.

Outlines emergency steps for winterizing, including draining pumps and heater.

Explains the importance of water quality for enjoyment and equipment longevity.

Caution against storing chemicals in the equipment bay.

Defines pH and stresses maintaining a slightly alkaline condition (7.2-7.8).

Explains the need for sanitizers like Chlorine and Bromine.

Warns against using Trichlor tablets due to corrosive effects.

Introduces the spa's self-diagnostic system and error messages.

Explains the SN1 and SN2 error codes related to sensor issues.

Explains the FL1 error code related to pressure switch or flow issues.

Explains error codes FL2 (pressure switch), COL (cool condition), and ICE (freeze protection).

Explains error codes OH (overheat) and general safety software triggered messages.

Introduces troubleshooting steps for common spa issues.

Provides troubleshooting steps for when no components operate.

Troubleshooting steps for pump not operating while light does.

Troubleshooting for pump operating but no water flow.

Steps to troubleshoot poor jet action, including pump, air, filter, and jet settings.

Solution for water being too hot.

Steps to troubleshoot no heat issue, including settings and cover usage.

Details logic jumper settings for J-210/J-220 models.

Indicates options for power connection.

Diagram for standard 3-wire 120 VAC connection.

Critical safety warning for wiring.

Diagram and instructions for optional 4-wire connection.

Details logic jumper settings for J-230 models.

Diagram for standard 240 VAC 3-wire connection.

Details logic jumper settings for export models.

Indicates hard wire connection only for export models.

Diagram for standard 3-wire 230 VAC connection.

Details logic jumper settings for J-230 export models.

Diagram for 230 VAC 3-wire connection.