To Next PageTo Next Page
Need help?Do you have a question about the Jacuzzi MAXI-PREMIUM J-210 and is the answer not in the manual?
Procedure for filling the spa with water.
Verification steps before powering on the spa.
Activating power, pumps, and adding chemicals for first use.
Explains the spa control panel display and indicator lights.
Buttons for adjusting temperature and activating spa pumps.
Operation of the spa's light and heating indicator.
Adjusting the spa's thermostat for desired water temperature.
How to turn spa pumps, light, and LED system on/off.
Customizing massage, adjusting jet flow, and air controls.
Details on standard heating/filtering cycles for different pump configurations.
Details on energy-saving economy filtering/heating cycles.
Modes for disabling spa functions for security or service.
Instructions for cleaning filter cartridges in J-210 and J-230/270/280 models.
Instructions for emptying and refilling the spa with water.
Tips for maintaining the spa's surface, cover, and panels.
Procedures to protect the spa from freezing temperatures.
Steps to safely restart the spa after cold weather.
Guidance on maintaining proper water chemistry and pH levels.
Importance of sanitizing water and optional ozonator system.
Explanation of overheating protection and summer mode operation.
Troubleshooting for SN1 and SN2 sensor error codes.
Troubleshooting FL1/FL2 errors for pump flow issues.
Steps for diagnosing issues when components do not work.
Addressing pump priming, poor jet action, and no water flow.
Troubleshooting for water that is too hot or too cold.
General