Need help?Do you have a question about the Jacuzzi J-Sha Mi and is the answer not in the manual?
Description of bath taps including drain control, shower head, and spout.
Steps for filling the tub, adjusting temperature, and water level checks.
How to turn on the remote control and initial display information.
Procedure to adjust and memorize the time on the remote display.
Selecting single colours for the tub's lighting system.
Activating pre-set colour sequences for ambient lighting.
How to switch permanent lights and colour cycles on and off.
Steps to activate the built-in radio using the remote control.
How to control radio volume and tune into stations.
Saving favorite radio frequencies for quick access.
Procedure to switch off the radio function.
Using the remote to start the automatic sanitization cycle.
Manually starting the sanitization cycle via the control panel button.
Steps for manual circuit sanitization if the system is absent.
Common causes and solutions when the hydromassage fails to operate.
Error codes and issues related to the electronic control unit.
Troubleshooting low water levels affecting hydromassage function.
Diagnosing issues with weak or inconsistent hydromassage jet output.
Addressing problems preventing the disinfection cycle from initiating.
Problems related to insufficient or empty disinfectant liquid levels.
Reasons why the sanitization cycle might terminate unexpectedly.
Instructions for cleaning the tub and remote control.
Procedures for cleaning the water intake filter and components.
Steps for cleaning and disassembling hydromassage jets.
To Next Page
General
