Need help?Do you have a question about the Jacuzzi J-385 and is the answer not in the manual?
General| Seating Capacity | 6-7 Adults |
|---|---|
| Pumps | 2 |
| Circulation Pump | Yes |
| Primary Pump | 2.5 HP |
| Secondary Pump | 2.5 HP continuous duty, 4.8 HP breakdown torque |
| Electrical Requirements | 240V |
Critical safety guidelines for spa operation, covering entrapment, hyperthermia, and electrical hazards.
Dangers of hair, limb, body, and mechanical entrapment with suction fittings and jets.
Risks associated with prolonged immersion and high water temperatures, causing overheating.
Specific electrical grounding and bonding requirements for Canadian installations.
General guidelines for safe electrical installation, grounding, and wiring.
Guidelines for selecting a stable, level, and appropriately surfaced location for the spa.
Electrical service specifications, including breaker sizes and wire requirements for different models.
Detailed instructions for wiring convertible and dedicated 240V models, including safety precautions.
Step-by-step guide for filling the spa with water, including preparation and initial power-up.
Overview of the spa's control panel, including buttons and indicators for operation.
Explanation of buttons and indicators on the spa's control panel for operation.
Basic operation procedures, including spa registration and temperature settings.
Guide to navigating spa menus for programming features like filtration and heating modes.
General overview of regular maintenance to keep the spa in optimal condition.
Instructions for cleaning the spa's pleated filter cartridges and skimmer bag.
Steps for draining the spa water and refilling it, including precautions.
Procedures for winterizing the spa to prevent freezing damage when not in use.
Importance of maintaining water chemistry for spa enjoyment and equipment longevity.
Importance of maintaining proper pH levels for water health and equipment protection.
How to use sanitizers like chlorine or bromine to destroy bacteria and organic compounds.
Explanation of how the CLEARRAY system uses UV light to purify spa water.
Instructions for replacing the UV bulb and cleaning the quartz tube for the CLEARRAY system.
List and explanations of error messages displayed on the control panel.
General guide to diagnosing and resolving common spa operational issues.
Steps to correct 'FL--1' and 'FL--2' flow errors, including checking filters and air locks.
Troubleshooting steps when the spa components like pumps or lights are not operating.
Steps to diagnose why the spa pump is not operating or not delivering water.
Tips for improving jet action, including checking jet positions and air controls.
Wiring diagrams for various North American and Export spa models.
Configuration settings for dip switches on the control board.
To Next Page
