Need help?Do you have a question about the Jacuzzi J-SS40 Salt System and is the answer not in the manual?
General| Product Name | J-SS40 Salt System |
|---|---|
| Category | Hot Tub |
| Compatible Brands | Jacuzzi |
| Chlorine Generation | Yes |
| pH Range | 7.2-7.8 |
| Type | Salt Water Chlorination System |
| Compatible Models | J-400 Series |
| Salt Cell Type | Titanium Cell |
| Voltage Requirement | 120V AC |
| Water Flow Requirement | Minimum 15 GPM |
| Water Temperature Range | 50-104°F |
| Installation | Inline |
| Control Interface | Integrated with the hot tub's control panel. |
| Control System | Integrated with Jacuzzi SmartTub™ System (on compatible models) |
Explains how the Jacuzzi Salt System converts salt to chlorine for pool sanitization and operation.
Guidance on the correct placement, orientation, and plumbing of the salt system cell.
Steps for adding and dissolving the correct salt level for optimal system performance.
Instructions on how to set and adjust the chlorine output level from 1 to 5.
Recommendations for optimizing chlorine production and filtration based on season.
Guidance on maintaining the recommended stabiliser reading between 30 and 60ppm.
Recommended pH levels for fibreglass and other pool types.
The ideal range for total alkalinity to ensure water balance.
Maintaining salt levels between 3,000-4,000ppm for cell life and operation.
Details on the automatic cleaning feature and manual cell maintenance.
Step-by-step guide for manually cleaning the salt system cell using acid solution.
Schedule for checking cell build-up, water chemistry, connections, and insect prevention.
To Next Page
