Jacuzzi J-SS40 Salt System User Manual

INST 397 Jacuzzi® J-SS40 Salt System V05-16
7
MAINTENANCE OF YOUR CHRLORINATOR
Maintenance Schedule: Your new product incorporates moving parts and withstands high velocity water with chemicals in
it. Some of these parts will wear in the normal course of use and require regular checks and maintenance. Performing
these checks and maintenance will identify parts that have worn and require repair/replacement before further serious
damage is sustained. A small amount of regular care and attention to your pool equipment will help ensure long life and
trouble free performance.
Timing
Maintenance Check
Service action (if required)
Every 2 weeks
Check cell for calcium build up
Check water chemistry
Check cable connections to cell
Soak electrode in mixture of 10 parts water
to 1 part acid. Use a soft brush only if
required
Balance pH in pool and adjust output of unit
to ensure satisfactory production of chlorine
Ensure no water contact is occurring with
pins
Every 3 Months
Check cell connections for leaks
Isolate Pump, turn power off, clean and
grease O rings or replace if necessary
Every 6 Months
Check chlorine levels and pump operating hours
Prevent insect ingress to controller
Adjust timer and output depending on
demand for current season.
Turn controller off, use an insect spray and
spray onto walls around controller. Do not
spay directly into unit.
Important note: Regular maintenance is important to ensure long life and trouble free performance of your pool equipment.
If unable to perform the maintenance yourself, contact www.Jacuzzipool.com who will arrange a trained service technician to
perform the maintenance for you.
Record your Equipment details here for quick reference:
Model No.: ____________________________
Serial No.: ____________________________
Inst date.: ____________________________
Installer.: ____________________________

Jacuzzi J-SS40 Salt System Specifications

General

Brand	Jacuzzi
Model	J-SS40 Salt System
Category	Hot Tub
Language	English