66
Non utilizzare assolutamente prodotti liquidi o in polvere
abrasivi, pagliette, prodotti cerati, prodotti candeggiati o fortemen
-
te clorati, detergenti chimici contenenti basi o acidi forti.
Piletta di scarico
QLa piletta, nel tempo, potrebbe ostruirsi; se si nota
una dicoltà nello scaricare l’acqua presente nel
piatto potrebbe rendersi necessario la pulizia del ce
-
stello posto all’interno della piletta.
- Sollevate il coperchio della piletta ed estraete il ce
-
stello, eettuandone quindi la pulizia.
- Reinserite il cestello, chiudete il coperchio della pi
-
letta.
Erogatore di vapore
QÈ possibile rimuovere i componenti
dell'erogatore, come indicato in gura,
in modo da agevolare le operazioni di
pulizia.
Seguite i consigli dati per i componenti
realizzati in metacrilato (piatto,parete,
tetto); terminata la pulizia, rimontate i
componenti sul corpo dell'erogatore.
Manutenzione straordinaria
GENERATORE DI VAPORE
QA seconda della qualità dell’acqua e della frequenza di uti-
lizzo del bagno turco, periodicamente è necessario eseguire
un’ispezione della caldaia, in modo da rimuovere totalmente
i depositi calcarei.
Per questo intervento, si prega di rivolgersi ad un Centro As-
sistenza Jacuzzi® autorizzato.
PAY ATTENTION TO THE INSTRUCTIONS AND DRAWINGS
BEFORE PROCEEDING WITH INSTALLATION
General Information
QCheck to ensure that the drain (1) is operative, as well as con-
nection to the water and electrical supply (2).
ATTENTION: IEC 603351/A2 The pressure of the wa-
ter system supplying the appliance must not exceed
600 kPa (6 bar).
Where "hard" water is present, it is advisable to install
a decalcier in the water system supplying the appli-
ance, in order to reduce and/or avoid calcareous de-
posits.
ATTENTION: in order to move the glass, use ONLY the
appropriate suction lifters; the size should be suited to
the weight of the actual glass. You must also use suit-
able protective gloves.
ATTENTION: during installation, we recommend pro-
tecting the tray from any possible knocks or scratches.
Q Do not install the equipment close to heat sources, di-
rectly exposed to sun rays or in dusty, humid places or those
susceptible to vibrations.
Q Before closing the shower enclosure panel, test the vari-
ous functions, checking for perfect hydraulic tightness of all
pipes and connections.
Electrical safety
Bali shower/Bali hammam shower enclosures are manufac-
tured according to regulations EN 60335-1, EN 60335-2-105,
EN 61000, EN 55014-1, EN 55014-2.
Q Installation must be carried out by qualied and authorized
personnel, in compliance with the national provisions in force.
It is the installer’s responsibility to select the mate-
rials, considering the way they will be used; to carry
out the installation correctly; and to verify the condi-
tion of the network to which the system will be con-
nected and its capability to ensure safety in mainte-
nance and inspection operations.
The building's electrical system and ground system
must be ecient and must conform to legal regula-
tions and specic national standards.
Where required, appropriate devices must be provid-
ed, which form part of the xed system, and installed
in compliance with current legislation in force, with
To Next Page
Loading...
Need help?
General
