Jacuzzi Comet User Manual

INSTALLING YOUR CLEANER 8
8
1.4 BRUSH INSTALLATION
1.5 PLACING & REMOVING CLEANER FROM POOL
IMPORTANT: To avoid damage to cleaner, do not drop cleaner into pool without controling its rate of
descent.
TO REMOVE: Slowly pull the COMET from your pool by the cable, ensuring the wheels of the cleaner
are facing the walls of your pool. Grasp the handle of the cleaner and allow water to fully drain.
1.4.1 Align the hooks on the bar with the holes on the underside of the cleaner as shown. Press each
hook into the holes until they are secured.
To release the line of bristles, press on the hooks to release them from the hole.
1.5.1 With one hand, firmly grasp the cable approximately 2 ft of length from cleaner. With the other
hand, firmly grasp cleaner handle. Gradually submerge cleaner into pool while slowly guiding
cleaner to the bottom of the pool.
Figure 1.4.1
Figure 1.5.1

Jacuzzi Comet Specifications

General

Brand	Jacuzzi
Model	Comet
Category	Swimming Pool Vacuum
Language	English