Jacuzzi frame - Frame TT Control Panel; TT Standby, Activation, and Alarms; TT Hydromassage and Turkish Bath

i
i
몇
몇
몇
i
It is possi-
ble to use
scented sticks
or essential oils
to perfume the
steam bath.
See the user
manual.
Press to activate (or disable)
the function.
Make
sure that
the waterfall,
the whirlpool
jets and/or scale
removal cycle
are not active.
If the symbol
ashes for a
few seconds, or
of it is not pos-
sible to activate
the function,
see the user
manual.
Press to activate.
Press once again to disable.
The water will exit from the opening at
the top, located on the unit roof.
Make sure
that you have
adjusted the water
temperature to the
desired level.
“Shiatsu”
“Cervical/lumbar”
Hydromassage jetsTurkish bathWaterfall
Press (any key) to
activate.
If no key is pressed for ap-
proximately 30 seconds,
the system enters “stand by”.
ERRORS
See the user manual
Press the relative key to acti-
vate the electronic function
desired.
Press(any key) to activate
the electronic functions.
When pressed, the
key starts to ash
and the alarm indicator
is immediately activat-
ed.
Press to activate. Press once
again to disable.
“Stand by”
“Stand-by”"Turning on"
"Alarms"
Some LED lights and/or keys will ash.
JVEQITT