Jacuzzi J - 200 J - 230 - Page 57

J-200
14.  While in seek
mode the stereo unit will automatically select 6 strong stations and
store them in the current band. Select a band (if needed).
Preset Scan: Scan stations stored in the current band. Select a band,
press AS/PS button for less than 3 seconds. The unit will pause for
ten seconds at each preset station. Press AS/PS button again to stop
scanning when the desired station is reached.
Stereo: The unit will automatically pick up a stereo signal when
available. When in stereo mode, the ST icon appears in the display.
When no stereo signal is available, the unit will automatically revert
to mono operation, and no icon will be displayed.
15.  In Tuner mode, any station can be
stored as preset 1 by pressing and holding this button for 2 seconds,
after the desired station is selected. To recall the station preset,
simply press and release this button. In CD mode, pressing this
button will pause or play the CD.
Note: When inserting a CD make sure the label side is facing up.
16.  In Tuner mode, any station can be stored as
preset 2 by simply pressing and holding this button for 2 seconds,
after the desired station is selected. To recall the station preset, simply
press and release this button. In CD mode, pressing this button will
preview each song on the disc for about 10 seconds. Press again to
turn off this feature or once the desired track is reached.
17.  In Tuner mode, any station can be stored as
preset 3 by simply pressing and holding this button for several seconds,
after the desired station is selected. To recall the station preset, simply
press and release this button. In CD mode, pressing this button will play
a song repeatedly. Press again to turn off this feature.
18.  In Tuner mode, any station can be stored as
preset 4 by simply pressing and holding this button for 2 seconds,
after the desired station is selected. To recall the station preset,
simply press and release this button. In CD mode, press this button
to randomly play song tracks. Press again to turn off this feature.
19.  In Tuner mode, any station can be stored as
preset 5 by simply pressing and holding this button for 2 seconds, after
the desired station is selected. To recall the station preset, simply
press and release this button. In CD mode, this button will browse the
folders on CD-R and CD-RW discs.
20.  In Tuner mode, any station can be stored as
preset 6 by simply pressing and holding this button for 2 seconds, after
the desired station is selected. To recall the station preset, simply
press and release this button. In CD mode, this button will browse the
folders on CD-R and CD-RW discs.
53