J-200
D. To adjust the selected menu item, press the VOLUME Up (7) or
Down (8) buttons.
E. After the selected menu item(s) has been changed and no other
buttons have been pressed within the 5-second time-out, the unit will
resume to the previous operation.
Contrast : “CONTRAST 5” will be displayed by default. The user now
has 5 seconds to press the VOLUME Up or Down buttons to adjust
from 0 – 10.
Dimmer : The dimmer feature of the display is set to “DIMMER High”
by default. Use the Volume Up or Down buttons to adjust the Dimmer
level between High or Low.
“Distant” is the default setting. User now has 5
seconds to adjust with the VOLUME Up or Down buttons from
“Distant” (a broader range of signals) to “Local” (only strong local
stations). This feature is used to designate the strength of the signals
at which the radio will stop during automatic tuning.
Area: “USA” is the default setting. User now has 5 seconds to select
“USA”, “LATIN”, “EUROPE” or “ORIT” by pressing the VOLUME Up or
Down buttons.
Note: “LATIN” and “ORIT” are not used.
Feature is not used.
“VOL PGM 12” is the default
setting. User now has 5 seconds to use the VOLUME Up or Down
buttons to program the turn on volume.
Beep Tone: “ON” is the default setting. User now has 5 seconds to
adjust by pressing the VOLUME Up or Down buttons from “ON” to
“OFF”.
6. Press Audio/Enter to navigate through the
stereo sound functions. Short press “AUDIO” button to access
the audio menu. User can navigate thru the audio menu items by
pressing the “AUDIO” button repeatedly, or by pressing the Tuning
Up (21) or Tuning Down Button (22). Once the desired menu item
appears on the display, adjust that option by using the Volume Up (7)
or Down button (8) within 5 seconds. The unit will automatically exit
the Audio Menu after ve seconds of inactivity.
49
To Next Page
Loading...
Need help?
General
