Page 69
J-400
3. When you enter the submenu
(Figure O), you can choose the
day(s) you would like “Program B” to
run for a heating cycle. Press the Up
or Down button (on the Quad
Keypad) to scroll through and
change the days you would like the
heating to activate. Press the Left or
Right button to turn “ON” ( ) or “OFF” the heating
for that day.
4. Press the Splash button once to save settings.
5. Press button D to return to the submenu to continue programming
the start time and duration (Figure N).
6. Once back to the “Program B” Main
Menu, press the Down button on the
Quad Keypad to select “Start Time”
(Figure P). Press the Left or Right
button on the Quad Keypad to select
the time you wish the spa to run.
Press the Down button on the Quad
keypad to access the “Duration”
setting.
Note: If you are using a standard 12-hour period, you will see the hour
displayed as “1PM.” For the 24-hour period it will read “1300.”
7. Now you will need to adjust the
“Duration” (Figure Q) of the cycle.
The duration range is from 0 (OFF)
to 6 hours. Press the Left or Right
button on the Quad Keypad to make
your adjustment(s) in increments of 1
hour.
Note: The default “Duration” is OFF.
8. Press the Splash button on the Quad Keypad to save
your changes and return to the Heating Menu.
9. Press button D to exit the Heating
Menu and return to the Settings 1
Main Menu. If you have programmed
both heating cycles and the settings
have been accepted, you will see the
two program icons next to word
Heating on the display (Figure R). If
only one cycle was programmed,
there will only be one icon.
Figure O
Select
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Press to Save
Monday
OFF
OFF
OFF
OFF
OFF
OFF
PROGRAM B
2
B
PROGRAM B
Start Time
Day Settings
Duration
Select
Start Time
1PM
Press to Save
2
B
Figure P
PROGRAM B
Start Time
Day Settings
Duration
Select
Press to Save
Duration
OFF
2
B
Figure Q
Press to
set filter or UV timer
Heating
UV Light
Filter
OFF
0 Days
SETTINGS 1
1
2
A B
Figure R
To Next Page
Loading...
Need help?
General
