42
Interior Lights Selection:Tap( ) to
enter the Interior Lights Menu.
Exterior Lights Selection: Tap ( ) to
change the intensity of the Exterior Lights.
Experience Mode Selection:Tap(
)
to enter the Experience Mode Menu.
Back Button: Tap to go back to the previous menu.
Invert Button: Tap to invert the display image.
Setting Button: Tap to access the programming and
setting menus.
I Interior Lights:
The interior lights consist of the waterfall lighting, above (peri-
meter lighting) and under (footwell lighting). Each can be in-
dependently controlled or they can be controlled in unison.
You can control 3 aspects of the interior lights.
Tap ( ) or ( ) to scroll through the selections for “Water-
fall,” “Above,” “Under” and “All.” If you choose the “All” option,
then the lights will work in unison and display the same featu-
res and colors.
To control the intensity of the interior lights follow the
steps below.
The “Bright” feature controls the intensity of the inte-
rior lights. Use (
) or ( ) to select your intensity level.
The levels range from 5 to 0, as follows: 5 = 100%, 4 = 80%,
3 = 60%, 2 = 40%, 1 = 20% and 0 = 0%.
Note: The default intensity level is 3.
This feature is available for the following selections: “Water-
fall,” “Above,” “Under” and “All.”
To control the speed of the interior lights follow the
steps below.
The “Speed” feature controls the speed of the color
blending, measured in seconds. Use (
) or ( )to select
speed rotation. The levels range from 5 to 0, as follows: 5 = 5
secs, 4 = 10 secs, 3 = 15 secs, 2 = 3 0 secs, 1 = 60 secs
and 0 = single color.
Note: The default speed interval is 0.
This feature is available for the following selections: “Water-
fall,” “Above,” “Under” and “All.”
To select a solid color for the interior lights follow the
steps below.
To make a selection t ap the color
block on the display. Colors available are White, Blue, Green,
Yellow, Orange, Red, and Pink.
Note: The default color will always be the last color used.
This feature is available for the following selections: “Water-
fall,” “Above,” “Under” and “All.”
I Exterior Lights
The exterior corner lighting has 4 settings. The lights display a
solid White color only.
By continually t apping “ ” you will scroll through the fol-
lowing:
OFF: Exterior lights are turned off.
MID: Solid White color with a 50% intensity level.
ON: Solid White color with a 100% intensity level.
AUTO: Solid White color with a 100% intensity level. Li-
ghts are on from 7:00 pm to 12:00 am.
Note: “AUTO” is the default setting.
I Experience
The lighting experience can be user enhanced by activating o-
ne of the settings below. Just tap one of the words (Quiet,
Fun, Glow or Joy) to start the experience. The default setting
is “Glow.”
Quiet: All interior lights are a solid Blue color with a 20% in-
tensity level.
Fun: All interior lights cycle through all colors with a 100% in-
tensity level and speed of 5.
Glow: All interior lights are a solid White color with a 100%
intensity level.
Joy: All interior lights cycle through all colors with an 80% in-
tensity level and speed of 3.
>
>
>
>
LIGHTS
Experience
quiet
glow joy
fun
LIGHTS
Interior
Exterior
Experience
>
>
speed
bright
Interior
5
waterfall
>
>
bright
speed
Experience
>
Exterior
Interior
>
LIGHTS
Interior
Exterior
Experience
>
>
96
6:45 PMON UV
To Next Page
Loading...
Need help?
General
