What to do if my Jacuzzi JA65 is not starting?
If your Jacuzzi Heat Pump isn't starting, first ensure that the main power is on. If the power is on, check if the unit is switched on. Also, inspect the fuse and replace it if it's burnt out. Finally, check the circuit breaker and switch it back on if it has tripped.
Instructions for turning the unit on and off.
Steps to set the desired water temperature for the unit.
Explains how to interpret malfunction codes shown on the controller screen.
General guidelines for installing the heat pump unit, including placement and connections.
Important warnings and precautions for safe and efficient operation of the heat pump.
Safety measures related to power supply, lightning, and long-term storage.
To Next Page
General