What to do if my Jacuzzi Heat Pump is not starting?
If your Jacuzzi Heat Pump isn't starting, first ensure that the main power is on. If the power is on, check if the unit is switched on. Also, inspect the fuse and replace it if it's burnt out. Finally, check the circuit breaker and switch it back on if it has tripped.
Explains how to turn the unit on and off using the wire controller.
Describes how to switch between Celsius and Fahrenheit temperature units.
Details the process of setting the desired water temperature.
Guides the user through setting the unit's clock.
Explains how to set the timer for operation.
Describes how to cancel an active timer setting.
Details how to lock and unlock the controller to prevent misoperation.
Provides recommendations for placing and securing the heat pump unit.
Illustrates the water pipe connections for the heat pump system.
Lists essential checks to perform before operating the heat pump unit.
Outlines the steps for the first use and testing of the heat pump.
Key operational considerations and warnings for the heat pump.
Essential safety guidelines for using the heat pump unit.
Procedure for turning off power before maintenance or inspection.
Technical specifications for different models of the heat pump.
Lists damages or poor operation not covered by the limited warranty.
Clarifies warranty scope regarding technician travel expenses.
Conditions under which the warranty becomes void.
To Next Page
General