cleaning
Replacing The Oven Bulbs
All Series
The oven light bulbs are located on the front sections
of both side walls.
1. Allow the bulb to cool completely before removing
it. Do not touch a hot bulb with a damp cloth; this
will cause the bulb to break.
2. Hold the cover glass with one hand, and use your
other hand to insert a bladed screwdriver between
the cover glass and the metallic case (metallic strip)
of the lamp. Do not insert the screwdriver between
the oven wall and the metallic case.
3. Unscrew and remove the burned out bulb. Screw
the new bulb in place.
4. To re-install the cover glass, first insert one side of
the cover in the metallic case; then, snap the
opposite side into place.
IMPORTANT: TURN OFF
ELECTRICAL POWER BEFORE
BEGINNING MAINTENANCE TO
ANY PART OF THE RANGE
47
COVER GLASS
METALLIC
CASE
BULB
OVEN TRAY
To Next Page
Loading...