See FAQ at support.jadens.com
6.1nstallation for Windows
Note:
Recommend to close security software before installation in caseof preventing installation,
and you can open it again after installation.
Win 7 or later
Linux, Win ARM
><
• Installation guide video in U-disk for better reference.
a. Connect power and computer (Pleaseskip this step if you have finished it before.)
b. Install the driver and printer for Windows
Copy the driver in the U-disk (Label Printer Driver.exe) to your
PC desktop, open and install it as below:
(You can also download Driver for Windows (JD-328BT) from
https://www.jadens.com/pages/jd328bt/
Driver version may be updated, see latest info at support.jadens.com.
Specify port specify •nodel
Mode'
Statue
c.After setting up the printer, check your computer if the printer has installed or not.
Click 'Print Test Page' to print a test page and print labels successfully, that means you have
set up the printer successfully.
Note:
If you can't print successfully, please restart your computer and printer, install again.
4
To Next Page
Loading...