Jadever JIF-2002 - Page 12

JIF-2002 WEIGHING INDICATOR&CONTROLLER
12
3-4 Quick Function Table
◎ WEIGHT FUNCTION TABLE
F 000
Decimal Point
Adjustment
0No Decimal 11 Decimal 22 Decimal
3 Decimal 44 Decimal
F 001
Weighing Unit
Selection
0None Kilogram 2Pound
F 002
Display
Update rate
110 times/Sec 20 times/Sec
340 times/Sec
F 003
Digital Filter
0 ∼ 7 step digital filter
F 004
Set Zero
Range
1±5% ±10% 3±20% 4±30% of Max. Capacity
F 005
Motion
Detection
0.5 SEC 1 DIV∼1 SEC 18 DIV 16 Steps (00 Stable)
F 006
Automatic
ZERO
Tracking
Compensation
1 SEC 0.5 DIV∼2 SEC 4.0 DIV 16 Steps (00 OFF)
F 007
ZERO &
TARE keys
Availability
ZERO & TARE keys  always work 1only work
when display is STABLE
F 008
TARE Key
Availability
TARE key always work 1If the GROSS is
Negative (-), TARE key does not work
F 009
Accumulation
Availability
0OFF 1Stable 2Manual
Control Input Command Accumulation
◎ 20 mA Current Loop STANDARD
F C00
Data type
Same as display 2Gross Weight
3NET Weight 4TARE Weight
5Gross Weight, NET Weight, TARE Weight
F C01
Output Mode
Stream 2 Stable and auto print 3Manual print
mode4Accumulate and print
F C02
Output Format
Sending without set point Code
1Sending with set point Code