JIF-2002 WEIGHING INDICATOR&CONTROLLER
13
◎ Batch Weighing
F 100
Zero Band 6 digit Zero band value (Initial ”000.000”)
F 101
Batching
Mode
Customer Programmed Control Mode :
Normal Batching Loss-in-Weight Batching
Built-in Automatic Program Mode :
Normal Batching Loss-in-Weight Batching
F 102
Timer-Compar
ator Inhibitor
Set between 0.0 to 2.0 Sec (Initial 0.0 Sec)
F 103
Timer-Finish
Signal
Set between 0.0 to 9.9 Sec (Initial 0.0 Sec)
F 104
Pulse Width of
Finish Signal
Set between 0.0 to 2.0 Sec (Initial 0.5 Sec)
F 105
COM 8 Unstable 1Error
F 106
Input Mode Panel key 2 BCD Input 3 Serial Input
F 107
Free Fall
compensation
Please enter 6 digit free fall compensation value
within effective range
(Initial “000.000”---Free Fall OFF)
◎ SERIAL ﹝RS-232﹞ OP- 02
F 200
Baud Rate 11200 BPS 2400 BPS 34800 BPS 49600 BPS
F 201
Parity 0 Non-parity Even Parity 2Odd Parity
F 202
Output Data
Same as display 2Gross Weight 3NET Weight
4TARE Weight 5Gross Weight, NET Weight, TARE
Weight
F 203
Output Mode
Stream 2 Stable and auto print 3Manual Print
Mode 4Accumulate and Print 5 Command Mode
F 204
Output Format
Sending without Set point Code 1Sending with
set point Code
◎PRINTER OP-03
F 300
Setting Date,
Time
Setting Year. Month, day, hour, minute, second
F 301
Data Format
Date
Not print 2Only print above the latest data
3Print on all
Time
1 Not print Only print above the latest data
3Print on all
To Next Page
Loading...