Jadever JIF-2002 - Page 14

JIF-2002 WEIGHING INDICATOR&CONTROLLER
14
Set
 Not print 2Only print above the latest data
3Print on all
Serial Number  Not print 1Print
Weight
Same as display 2Gross Weight
3NET Weight 4TARE Weight
5Gross Weight, NET Weight, TARE Weight
6Gross Weight, TARE Weight, NET Weight
Unit
0Not print Only print above the latest data
according to F0012Only print the latest data “g”
3Only print above the latest data ”t” 4Print on all
according to F0015Print on all “g” 6Print on all “t”
F 302
Output Mode
1Stable and auto print Manual Print Mode
3Accumulate and Print
F 303
Select Printer MINI Printer 2Normal Printer
◎ BCD OP-04
F 400
Data type
Same as display 2Gross data 3NET data
4TARE data
F 401
Output Mode
Stream 2 Stable and print 3Manual print
mode4Accumulate and print
F 402
Output Logic Positive Logic 2Negative Logic
◎ Analog Output
F 500
Analog Output
Data
Output 4~20 mA Output 0~+10 V
F 501
Output Mode Same as display 2Gross data 3NET data
F 502
Loss-in-weight
Absolute Value
Not read Absolute Value
1 BDI-2002 reads Absolute Value
F 503
Output current
when display
ZERO
0.0mA through 9.99mA (Initial 0.40 mA)
F 504
Output current
at Full Capacity
0.0mA through 9.99mA (Initial 20.0 mA)
F 505
Output Volt
when display
ZERO
-2.5V through +59.9V (Initial 00.0 V)
F 506
Output Volt at
Full Capacity
-2.5V through +59.9V (Initial 10.0 V)