JIF-2002 WEIGHING INDICATOR&CONTROLLER
34
STEP 3: Please press TARE/CLEAR key and a blinking LOC will show
on the screen. After enter ↵ key, a 〔 〕 will show on the
screen. Please press the key you wish to disable. The screen
will show the key’s number. JIF-2002 will inquire if you want to
lock or unlock the key: 〔00〕u or L (Key number〔00〕: Unlock
or Lock the key).
STEP 4: Use the or key to choose lock or unlock the key and press
↵ key for confirmation.
STEP 5 : Slide the SET switch to the original side for finishing the step.
4-5 COPY SYSTEM PARAMETER
A backup can be stored to prevent data loss.
⌦System Parameter:
includes functions FXXX, Calibration parameters, disable keys.
STEP 1: Turn the Power Switch OFF on the rear panel. Slide the SET
switch to the set side.
STEP 2: Turn the power switch ON. The screen will show blinking
SELECT.
STEP 3: Please press ACC/CLEAR key and a blinking COPY will show
on the screen. Please enter ↵ key.
STEP 4: Use the or key to choose NO or YES . If NO is entered, the
screen will show END. If YES is entered, the screen will
show ……→ END .
STEP 5 : Slide the SET switch to the original side for finishing the step.
To Next Page
Loading...