21
Use
Starting the watch
Pull crown B out to position 1.
A few clockwise turns of the crown are enough to set the watch running.
It will then automatically wind up when you wear it. Please note that the crown
does not lock when winding, even when the watch is fully wound.
Setting the date
Pull crown A out to position 2.
This timepiece features a date display window at 3 o’clock and a rapid correc-
tion system. If you have to move the date one day forward, turn crown A (in
position 2) clockwise.
Repeat the operation until the desired date is displayed. For months with less
than 31 days, repeat this process to reach the 1st of the following month. Once
the operation is complete, push crown A back into position 1.
After setting the date, move the hands forward to the desired time – via
12 o’clock if it is after noon.
2
A
B
1
21
English
To Next Page
Loading...
Need help?
General
