Jaga BRIZA 12 User Manual

HANDLEIDING
BRIZA 12 - JFCC
MANUEL
ANLEITUNG
MANUAL

Jaga BRIZA 12 Specifications

General

Brand	Jaga
Model	BRIZA 12
Category	Temperature Controller
Language	English

Summary

A. 0-10V BMS WITH WATER TEMPERATURE MONITORING

A.1. FACTORY SETTINGS

Unit starts based on 0-10V signal and water temperature.

B. 0-10V BMS WITH WATER- AND ROOM TEMPERATURE MONITORING (AUTO-CHANGE-OVER)

B.1. FACTORY SETTINGS

Unit starts via auto-change-over based on water temp.

B.2. CONTROL

How to select modes and adjust fan speed.

C. ROOM THERMOSTAT

C.1. FACTORY SETTINGS

Unit controlled via room thermostat based on temp and signal.

C2.1. JRT-100

Configuration and settings for the JRT-100 model.

C2.2. JRT-100TW

Configuration and settings for the JRT-100TW model.

2. SETTINGS

2.1. ADJUSTING THE WATER TEMPERATURE

How to set max/min water temperatures for cooling and heating.

2.2. SETTING FANSPEED

How to adjust fan speed with or without a control panel.

2.3. CIRCUIT BOARD ERROR CODE

Explains error codes related to sensors on the circuit board.

2.4. FACTORY RESET

Procedure to reset the controller to factory default settings.

3. DECLARATION OF CONFORMITY

4. WARRANTY CONDITIONS