Jaga BRIZA 12-JFCC - User Manual

BRIZA 12 - JFCC
HANDLEIDING / MANUEL / ANLEITUNG / MANUAL

Summary

A. 0-10 V BMS With Water Temperature Monitoring

A.1. Factory Settings

Details on factory settings for the 0-10V BMS unit with water temperature monitoring.

B. 0-10 V BMS with Water and Room Temperature Monitoring

B.1. Factory Settings

Factory settings for the auto-change-over 0-10V BMS unit, including cooling and heating modes.

B.2. Control

Instructions for controlling the unit, including mode switching and fan speed adjustment.

C. Room Thermostat JRT-100

C.1. Factory Settings

Factory settings for the JRT-100 room thermostat, covering 2-pipe and 4-pipe connections.

C2. Room Thermostat Operation

C2.1. JRT-100 Programmable Time Zones

Setting programmable time zones for the JRT-100 thermostat, including on/off times.

C2.2. Parameter Settings

Detailed parameter settings for the JRT-100 thermostat, including temperature, fan speed, and mode.

2. Settings

2.1. Adjusting the Water Temperature

Guides for adjusting maximum cooling and minimum heating water temperatures for optimal unit operation.

2.2. Setting Fanspeed

Instructions for setting fan speed, both with and without using the control panel.

2.3. Circuit Board Error Code

2.4. Factory Reset

3. Declaration of Conformity

4. Warranty Conditions

Jaga BRIZA 12-JFCC Specifications

General

Brand	Jaga
Model	BRIZA 12-JFCC
Category	Thermostat
Language	English