Jaga JRT-100 User Manual

Jaga Room Thermostat JRT-100 installation, setup & user manual
JRT-100
ATTENTION !!
1.5 m
The room thermostat should be installed at approx.
1.5 m above floor and where the effects of sunlight,
draught or other heat sources: nearby electric fires,
televisions, wall or table lamps may prevent the ther-
mostat from working properly.
Ensure that there will be enough space to allow easy
access to the two retaining screws, located at the bot-
tom of the wall plate.
1.43.4
6
Mount the JRT-100 Room thermostat on a recessed
conduit box (60.3 mm fixing centers). Minimum depth
of 45mm, more is better to fit cables. The Internal
size of the wall recess box must be at least Ø60mm or
50x50mm.
Features
• for 2- and 4-pipe fan coil systems
• (4-pipe): heating and cooling mode / auto changeover heating and cooling
• (2-pipe): heating and cooling mode
• automatic or manual fan speed control
• surface-mounting
• 2 programmable time zones
• 0-10V output
• for valves 24V AC/DC only
• optional external room temperature sensor (order code: 24800.0005.3032)
Technical Data
Power Supply 24V AC/DC
Power Consumption 200 mA
Set Point Range 10~50°C
Ambient 0~50°C
Relative Humidity 85%
Back-light
Sensor NTC 10K, 3950 ohm at 25°C
Accuracy + 1°C (step control by +0.5°C)
Protection Class IP30
Housing ABS to UL94-5 fire retardant plastic
Productdocumentation:
• this manual is an integral part of the unit and must be handed over to the user
after the installation of the device is completed in order to comply with applicable
legal requirements.
• please read the manual carefully so that you understand the information in order
to ensure safety during installation, use and maintenance.
• no liability is accepted for damage resulting from non-compliance with the
guidelines in this installation manual.
Dimensions
M
8.6
8.6
6 1.4 3.4
CE-mark
The CE-mark symbolizes the compliance of the device with the following guide-
lines:
• EN 61000-6-3:2007+A1:2011
• EN 61000-3-2:2006+A1:2009+A2:2009
• EN 61000-3-3:2008
• EN 61000-6-1:2007
IMPORTANT: This manual will guide you through the installation, setup and use of the Jaga Room Thermostat JRT-100. Keep this manual in a
safe place for future reference.

Jaga JRT-100 Specifications

General

Accuracy	±0.5°C
Temperature Range	5°C to 30°C
Ambient Temperature	0°C to 40°C
Relative Humidity	non-condensing
Type	Electronic Room Thermostat

Summary

Jaga Room Thermostat JRT-100 Overview and Features

Technical Specifications

Details power supply, consumption, set point range, ambient conditions, humidity, sensor, accuracy, and protection class.

Installation Location and Attention

Provides guidelines for optimal thermostat placement, avoiding heat sources, and required mounting space.

CE Mark Compliance

Lists the EN directives and standards the device complies with, indicating product conformity.

JRT-100 Thermostat Installation Procedure

Mounting, Wiring, and Front Plate Assembly

Guides through mounting the base, connecting wires per diagram, and closing the front plate securely.

JRT-100 Control Panel and Settings Configuration

Programmable Time Settings

Instructions for setting daily on/off times for heating and cooling based on programmable time zones.

Parameter Settings Menu

Details how to access and navigate the menu for advanced settings like temperature offset and limits.