Jaga JRT-100TW - User Manual

BRIZA 12 - JFCC
HANDLEIDING / MANUEL / ANLEITUNG / MANUAL

Jaga JRT-100TW Specifications

General

Brand	Jaga
Model	JRT-100TW
Category	Thermostat
Language	English

Summary

A. 0-10 V BMS WITH WATER TEMPERATURE MONITORING

A.1. FACTORY SETTINGS

Unit controlled via BMS, auto-start based on signal and water temperature.

A.1. FACTORY SETTINGS CONTINUED

Specific start conditions based on water temp and control signal (FCC.BR722/BR724).

A.1. FACTORY SETTINGS ADDITIONAL

Fan speed controlled by signal; window contact activated via DIP switch.

B. 0-10 V BMS WITH WATER- AND ROOM TEMPERATURE MONITORING (AUTO-CHANGE-OVER)

B.1. FACTORY SETTINGS

Unit controlled via auto-change-over; manual mode selection is possible.

B.1. FACTORY SETTINGS CONTINUED

B.1. FACTORY SETTINGS ADDITIONAL

C. ROOM THERMOSTAT JRT-100 (J1); JRT-100 TW (J2)

2. SETTINGS

2.1.1. ADJUSTING MAX WATER TEMP FOR COOLING

Procedure for adjusting maximum cooling water temperature settings.

2.1.2. ADJUSTING MIN WATER TEMP FOR HEATING

Procedure for adjusting minimum heating water temperature settings.

2.2.1. SETTING FANSPEED WITHOUT CONTROL PANEL

2.2.2. SETTING FANSPEED WITH CONTROL PANEL