What to do if my Jägermeister G4TM Commercial Food Equipment is not cooling?
If your Jägermeister Commercial Food Equipment is not cooling and the LEDs are off, the fuse may have blown. Replace the fuse to resolve this issue.
Why is my Jägermeister G4TM Commercial Food Equipment not working when connected to an extension socket?
If your Jägermeister Commercial Food Equipment, connected to the extension socket, is not operating, the fuse may have blown. Replace the fuse.
How to fix Jägermeister G4TM that gets warmer gradually?
If your Jägermeister Commercial Food Equipment is gradually getting warmer, the air filter may be dirty. Clean the air filter. If you clean it with water, ensure it's completely dry before reusing the device.
Why is Jägermeister dripping from the bottlewell of my Commercial Food Equipment?
If Jägermeister is dripping from the bottlewell of your Commercial Food Equipment, it could be due to several reasons: * The sealing rings might not be properly positioned; check their fit and reposition if necessary. * The bottle stoppers could be defective; replace them. * The sealing rings might be defective; replace them.
What to do if the bottle is dripping on Jägermeister G4TM?
If your Jägermeister Commercial Food Equipment bottle is dripping, ensure that the bottle stopper is correctly seated and screw it on properly if necessary.
Why does Jägermeister Commercial Food Equipment consume a lot of energy?
If your Jägermeister Commercial Food Equipment consumes a lot of energy and the cooling capacity isn't optimal, ensure there is enough free space at the back and bottom of the device. The air circulation at the back and bottom of the device affects the energy and the cooling performance.
Why is Jägermeister dripping from the bottlewell of my Beverage Dispenser?
If Jägermeister is dripping from the bottlewell of your Beverage Dispenser, the sealing rings may not be correctly positioned. Check their placement and adjust if needed. Alternatively, the bottle stoppers or the sealing rings themselves could be defective and require replacement.
What to do if the bottle is dripping in Jägermeister Beverage Dispenser?
If the bottle is dripping in your Jägermeister Beverage Dispenser, the bottle stopper might not be properly secured. Ensure it's correctly seated and screw it on tightly.
What to do if Jägermeister Beverage Dispenser is not cooling and the LEDs are not lit?
If your Jägermeister Beverage Dispenser is not cooling and the LEDs are off, the fuse may have blown. Replace the fuse.
Why is my Jägermeister Beverage Dispenser using too much energy and not cooling properly?
If your Jägermeister Beverage Dispenser is consuming a lot of energy and not cooling effectively, it might be due to poor air circulation around the unit. Ensure there's sufficient clearance: 8 cm at the rear and 3 cm on the sides.
Introduction to the Jägermeister Tap Machine manual and its purpose.
Advice on keeping and using the manual for proper device operation.
Statement regarding the copyright ownership and usage restrictions of the manual.
Specifies the authorized applications and environments for the Jägermeister Tap Machine.
Provides crucial safety principles for operating the tap machine.
Details measures to avoid electric shock by proper connection and handling of power components.
Provides guidelines to prevent fire hazards related to the device's operation and placement.
Alerts users to the risk of suffocation from small parts and packaging film.
Identifies individuals who should not use the device to prevent injuries.
Advises on environmentally sound disposal methods for the device.
Offers advice on proper handling and maintenance to avoid operational issues.
Explains the significance of WARNING labels indicating dangerous situations.
Explains the significance of ATTENTION labels indicating property damage risks.
Lists all components included in the package with the Jägermeister Tap Machine.
Identifies and labels the various parts of the Jägermeister Tap Machine.
Explains the primary purpose and operation of the Jägermeister Tap Machine.
Describes the details provided on the device's rating label for identification.
Provides step-by-step instructions for safely opening and removing the device from its packaging.
Guides on verifying that all components are present and in good condition.
Recommends conditions for storing the device to maintain its integrity.
Provides instructions on how to transport the device safely and correctly.
Highlights critical safety warnings related to device installation and placement.
Details the procedure for placing and assembling the tap machine components.
Specifies the required waiting time after moving the device before operation.
Outlines the sequence of actions required to start the device for the first time.
Details how to safely connect the device to the power supply.
Explains the correct method for unplugging the device from the power source.
Describes the process of attaching the bottle stopper to the Jägermeister bottle.
Explains how to detach the bottle stopper from the bottle.
Details the correct method for placing a Jägermeister bottle into the device.
Explains how to safely take a Jägermeister bottle out of the device.
Instructs on how to turn the Jägermeister Tap Machine on.
Instructs on how to turn the Jägermeister Tap Machine off.
Provides information on cooling temperature, time, and low liquid level indicators.
Details indicator functions that vary based on device serial number ranges.
Explains new indicator functions for fill level, cooling, and temperature.
Describes the action of pressing the tap handle to dispense Jägermeister.
Explains how releasing the tap handle halts the Jägermeister dispensing.
Addresses the normal occurrence of bubbles during and after dispensing.
Lists elements that influence the final temperature of a Jägermeister shot.
States the typical temperature range for dispensed Jägermeister shots.
Emphasizes removing power before cleaning to prevent electric shock.
Warns against water or liquids entering the device housing to prevent short circuits.
Advises on using appropriate methods and materials for cleaning the device.
Stresses the importance of removing residual water to prevent internal freezing.
Details the specific cleaning actions to be performed on a weekly basis.
Outlines the cleaning procedures required for monthly maintenance.
Addresses problems with Jägermeister dripping from the bottlewell or tap and its causes.
Covers issues related to high energy use and suboptimal cooling capacity.
Diagnoses problems where the device is not cooling and LEDs are off.
Addresses scenarios of poor cooling despite the device appearing functional.
Diagnoses issues where the device connected to an extension socket is not functioning.
Explains why the device might gradually get warmer and solutions.
Addresses the issue where bubbling after tapping does not stop as expected.
Details the steps for safely replacing a blown fuse in the device.
Explains how to replace a fuse in the extension socket.
Guides on how to safely switch off and prepare the device for long-term storage.
Advises on recycling and disposing of the packaging materials correctly.
Outlines the regulations for disposing of the electrical device responsibly.
Explains what the warranty covers, including material and workmanship defects.
Lists conditions and situations where the warranty is not applicable.
General| Category | Commercial Food Equipment |
|---|---|
| Model | G4TM |
| Brand | Jägermeister |
| Frequency | 50 Hz |
| Material | Stainless Steel |
| Voltage | 220-240 V |
To Next Page
