BLUETOOTH
®
CONNECTION, CONTINUED
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds) and
look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Turf in your device’s Bluetooth list or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and Bluetooth will find each other every time, as long as
the speaker is set to Bluetooth and your device’s Bluetooth is, you
know, on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device, press and
hold the + and – buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Turf but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or
more, the JAM Turf will automatically shut off to preserve battery
power.
LIKE HAVING YOUR OWN CADDIE
Okay, so it won’t carry your clubs for
you. But the Turf has your back both
on and off the course. With a
magnetized ball marker and storage
for up to five tees, you’ll always be
prepared for that next shot. Two tees
are included to get you started right
out of the box. Back at the
clubhouse, the removable carabiner
doubles as a handy bottle opener.
2m
15m
HELLO? SPEAKERPHONE? YES!
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM Turf.
Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Turf.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Turf for 3 seconds to ignore the call.
THE COOLEST PART: The Turf knows when a call is coming in and pauses the music before ringing. When you hang up, the music
starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Turf automatically
does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Turf.
COMING CLEAN
A soft, dry towel is all you need to
clean off your speaker. Using harsh
cleaners, or anything else, only starts
messing with the mechanics inside.
So, yeah, don’t do it.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
Auxiliary cable not included.
Situation
Short Press Play/Pause Button Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1
st
call and 2
nd
call
POWER ON THE GO
Out of juice? Let
the Turf be your
backup battery.
Charge your
smartphone or
other devices from
your speaker by
plugging them into
the USB port.
To Next Page
Loading...
Need help?
General
