HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P520
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P520)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/customer-support-canada
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Turf needs about 6 hours for up to 8 hours of party time.
The LED lights on your speaker let
you know what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, use the
adapter that came with the speaker or use any
USB AC adapter, including the one for your cell.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds) and
look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Turf in your device’s Bluetooth list or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
The device and Bluetooth will find each other every time, as long as
the speaker is set to Bluetooth and your device’s Bluetooth is, you
know, on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device, press and
hold the + and – buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Turf but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or
more, the JAM Turf will automatically shut off to preserve battery
power.
Thank you for purchasing
the JAM Turf. Check out
the sections below for all
the important information
about your new speaker.
Pairing Mode
Bluetooth Light Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
AC adapter not included.
or
6h
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. Lets you know when Bluetooth is paired
2. Turn the music down or go back a track
3. Push it to play, push it again to pause
4. Turn the music up or jam on to the next song
5. This is the power button
6. Check out how much juice is in the battery
7. The power cord goes here
8. Charge your devices here
7. Here’s where you hook it up old-school
3s
JAM Turf
Bluetooth
®
Devices
3
5
2
1
4
6
7
8
9
To Next Page
Need help?
General
