98
EN EN
CONNECTING TO WIFI
Ensure your device is connected to a
wireless network, then open the JAM
WiFi app. On the home screen, press
"New Speaker Setup" to connect
the speaker. You will be prompted to
choose your speaker. Choose “JAM
Voice” from the speaker list. Please note:
only 2.4GHz networks are supported.
Power on your JAM Voice by
pressing and holding the power
button for 3 seconds. An
audible tone will indicate that
the unit is turned on, wait for a
second audible tone to indicate
your speaker is ready to
connect to you Wi-Fi network.
Have your wireless network
password ready. Press and
hold the
button on the
bottom of your speaker for
3 seconds. After you do
this, you will hear an audible
confirmation: “Searching for
WiFi Connection.”
The app will prompt you to
enter your network password.
When connected, you will hear
“Connected,” the LED light on
the speaker will turn solid white,
and your app will show the
above screen.
No Jam
Speaker Found
New Speaker Setup
3s
Please select
your device
Jam Voice
Jam Rhythm
Jam Symphony
Press and hold the
button on the bottom of the
speaker for 3 seconds. Once in
connection mode, the speaker
will give you an audible
FRQȴUPDWLRQ+DYH\RXU
network password ready.
Back 1H[W
1H[W
Connected