EasyManua.ls Logo

Jamara E-Rix 450 - 3 D Flight Operations; 3 D Flight Parameters and Notes

Jamara E-Rix 450
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
3D Flight
3D-Flight
Throttle Curve Pitch
5 100 % hight +9° ~ +11°
3 50 %
1 100 % low -9° ~ -11°
Throttle Curve(3D Flight)
Stick position at high/Throttle 100%/Pitch+9º~+11º
Stick position at middle/Throttle 90%/Pitch 0º
Stick position at low/Throttle 100%/Pitch-9º~11º
Note:
• If the pitch angle is set too high, then the helicopter can not
move properly resulting in shorter flying time.
• If your set for a high rotor RPM, then a high pitch is
recommended..
• If unsure, it is always recommended to set a low pitch. The
result is that a higher rotor head RPM is achieved and the heli
copter will fly more stable.
Important:
When flying 3D, secure the canopy with an additional screw at
the bottom of the canopy. Otherwise it can come lose and dama-
ge the helicopter.

Related product manuals