9
Cleaning large items
Iftheitemistoolargetofitcompletelyinthetank,thenyoucanusethe
ultrasonic cleaner with the item partly immersed with the lid open. Ensure the
“MAX” marking is not exceeded when immersing the item.
It is perfectly safe to use the cleaner with the lid off, although we recommend
youleavethelidonwherepossibleasitwillhelptokeepthefluidwarmerfor
longer.
Warmfluid=Bettercleaning,everytime.
Important notes
• Care should be taken when using different types of cleaning soaps or
detergents. Always ensure they are suitable for the item you are cleaning. If in
doubt, please ask James Products or check www.jpl.uk.com.
• If there is any danger of scratching to an item to be cleaned, place the item
on the supplied plastic tray (to separate the item from the stainless steel tank)
before immersing in the tank. Unavoidably, the tray absorbs some of the
ultrasonic energy, which may slightly reduce the effectiveness of the cleaning
action. If the item is not at risk of damage from vibrations against the stainless
steeltank,thenthetraycanbeomittedformoreefficientcleaning.
• The use of SOLVENTS or ALCOHOL in the tank or on any part of the cleaner
will damage your ultrasonic cleaner and void any warranty.
Emptying the tank
• Remember to change the water between cycles as it becomes dirty.
• Always ensure the unit is unplugged when changing the water.
• Always pour liquid away via the rear channels, avoiding the ventilation slots /
power inlet on the sides and control panel on the front face.
• Any waste Metal Gleam concentrate should be disposed of via the local
authority solvent disposal programme.
To Next Page
Loading...
Need help?
General
